CK7525 series CNC lathes
Time：2016/11/24 Traffic：
Introduction
| ITEMS | UNIT | CK7525 | CK7525A | CK7525C | |
| Capacity | Max.swing diameter over bed | mm | φ550 | φ550 | φ550 |
| Max.swing dia. over slide | mm | φ370 | φ370 | φ280 | |
| Max.turning diameter | mm | φ450 | φ450 | φ450 | |
| Max.turning length | mm | 500/1000/1500 | 500/1000/1500 | 500/1000/1500 | |
| Max.bar diameter | mm | φ73 | φ73 | φ73 | |
| Spindle | Type of spindle nose | A2-8 | A2-8 | A2-8 | |
| Spindle bore diameter | mm | φ87 | φ87 | φ87 | |
| Chuck diameter | mm | φ254 | φ254 | φ254 | |
| Spindle speeds | r/min | 30-3000 | 75-1500 | 30-3000 | |
| Spindle motor power(continuous/30min) | kW | 15/18.5 | 18.5 | 15/18.5 | |
| Tailstock | Quill diameter | mm | φ100 | φ100 | φ100 |
| Quill travel | mm | 100 | 100 | 100 | |
| Taper of center(standard/alive spindle) | Morse No.5/4 | Morse No.5/4 | Morse No.5/4 | ||
| Feeds | Travel X/Z | mm |
250/525 250/1010 250/1500 |
250/525 250/1010 250/1550 |
250/500 250/1010 |
| Rapid traverse rate X/Z | m/min | 12/16 | 12/16 | 24/24 | |
| Turret | Number of turret station | 12/8 | 12/8 | 12/8 | |
| Tool size（turning/boring） | mm | 25×25/φ40 | 25×25/φ40 | 25×25/φ40 | |
| Other | Slant degree of bed | 45° | 45° | 45° | |
| Power supply | kVA | 50 | 50 | 50 | |
| Dimensions (L×W×H) | mm |
500：2980×1850×2050 1000：3785×1850×1930 1500：4600×1850×2050 |
500：2980×1850×2050 1000：3785×1850×1930 1500：4600×1850×2050 |
500：2980×1850×2050 1000：3785×1850×1930 |
|
| Weight | kg | 4800/5000/6700 | 4800/5000/6700 | 4800/5300 | |
