C61100/C61125 Series horizontal Lathe
Time：2016/11/24 Traffic：
Specifications
Table 1
| Item | Specification | ||
| Max. swing | over bed | φ1000mm | φ1250mm |
| over slide | φ630mm | φ880mm | |
| Max. workpiece length | Max. distance between centers | 1500mm, 2000mm, 3000mm | |
| Max. workpiece turning length | 1300mm, 1800mm, 2800mm | ||
| Bed and spindle | Length of bed | 4200mm, 4700mm, 5700mm | |
| Width of bed way | 755mm | ||
| Spindle nose | A2-15 | ||
| Taper of spindle front | 140# metric taprer | ||
| Spindle thru-hole | φ130mm | ||
| Taper of center | Morse taper No. 6 | ||
| Front bearing of spindle | φ200mm | ||
| Middle bearing of spindle | φ180mm | ||
| Rear bearing of spindle | φ160mm | ||
| Tailstock | Diameter of quill | φ160mm | |
| Taper hole of quill | Morse taper No. 6 | ||
| Effective travel of quill | 300mm | ||
| Width of tailstock way | 460mm | ||
| Turret | Max. permissible tool section | 45mm×45mm | |
| Swivel angle of mid slide | ±90° | ||
| Max. travel of upper slide | 300mm | ||
| Max. travel of lower slide | 520mm | 630mm | |
| Motion | Step of spindle speed | 21 step | |
| Range of spindle speed | 3.15~315r/min | ||
| Feed | Longitudinal and cross feed | 56 kinds for each | |
| Range of feed | Cross feed | 0.05~6mm/r | |
| Longitudinal feed | 0.1~12mm/r | ||
| Diameter and pitch of lead screw | Diameter | φ70mm | |
| Pitch | 12mm | ||
Table 2
| Item | Specification | ||
| Range of threading | Kinds of metric threads | 44 kinds | |
| Range of metric threads | 1~120mm | ||
| Kinds of inch threads | 42 kinds | ||
| Range of inch threads | 30~1/4tpi | ||
| Kinds of module threads | 45 kinds | ||
| Range of module threads | 0.5~60πmm | ||
| Kinds of DP threads | 47 kinds | ||
| Range of DP threads | 60~0.5DP | ||
| Drive | Power source | 3-phase AC power | |
| Main motor | Y180L-4 | ||
| Power of main motor | 22kW | ||
| Speed of main motor | 1450r/min | ||
| Rapid traverse motor | YS90S-2 | ||
| Power of rapid traverse motor | 1.5kW | ||
| Speed of rapid traverse motor | 2800r/min | ||
| Coolant pump | AYB-25 | ||
| Power of coolant pump | 0.12kW | ||
| Flow of coolant pump | 25L/min | ||
| Operation and lubrication | Gear pump | HY01-12×20 | |
| Pressure of gear pump | 2MPa | ||
| Flow of gear pump | 12L/min | ||
| Speed of gear pump | 1450r/min | ||
| Working pressure of oil cylinder | 1~1.5MPa | ||
| Dimension and weight | Height | 1400mm | 1530mm |
| Length | 4600mm, 5100mm, 6100mm | ||
| Width | 1700mm | 1850mm | |
| Net weight | 9200kg, 10200 kg, 10700kg |
10500 kg, 11000kg， 12000kg |
|
