Hole High Speed Precision Lathe CD6140C
Time：2016/11/19 Traffic：
Features
Large plane, good looking.
Hardened & PEISHAUER-gound gears.
Dynamically balanced main spindle.
Mutiple choice; you can choose metric or inch system, right or left hand wheel, mutiple voltages and frequencies, with or without “CE” protection system and rapid moving system.
| Model |
CD6140C CD6240C |
CD6145C CD6245C |
CD6150C CD6250C |
CD6160C CD6260C |
|
| Max. swing over bed | 400mm | 450mm | 500mm | 600mm | |
| Max. swing over cross slide | 225mm | 285mm | 325mm | 360mm | |
| Center distance | 1000,1500, 2000mm | ||||
| Max.swing over gap | 550mm | 580mm | 630mm | 730mm | |
| Effective length of gap | 260mm | ||||
| Bed width | 330mm | ||||
| Spindle hole | 80mm | ||||
| Spindle nose | ISO-C8 or ISO-D8 | ||||
| Spindle taper | Metric 85mm | ||||
| Spindle speeds(Number) | 24-1600rpm (15 Steps) | ||||
| Metric threads range (Kinds) | 0.5-28MM(66 Kinds) | ||||
| Inch threads range (Kinds) | 1-56inch(66 Kinds) | ||||
| Module threads range (Kinds) | 0.5-3.5mm (33 Kinds) | ||||
| Diametral threads range (Kinds) | 8-56D.P (33 Kinds) | ||||
| longitudinal feeds range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15inch/rev)(66kinds) | ||||
| Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075inch/rev)(66kinds) | ||||
| Rapid traveling speed of carriage | 5m/min(16.4ft/min) | ||||
| Leadscrew size: Diameter /Pitch | 35mm/6mmor35mm/1/4〞 | ||||
| Cross slide travel | 300mm | ||||
| Compound rest travel | 130mm | ||||
| Cross-section size of toolshank | 25x25mm | ||||
| Taper of tailstock sleeve | Morse NO.5 | ||||
| Diameter of tailstock sleeve | 65mm | ||||
| Travel of tailstock sleeve | 120mm | ||||
| Main drive motor | 4.0 or 5.5 or 7.5kw | 7.5kw | |||
| Coolantpumpmotor | 0.125kw | ||||
| Rapid traverse moter | 0.12kw | ||||
| Packing size (LxWxH) | 1000mm | 2420x1150x1800mm | |||
| 1500mm | 2920x1150x1800mm | ||||
| 2000mm | 3460x1150x1800mm | ||||
|
Net weight /Gross weight(kgs) |
1000mm | 1640/2290 | 1680/2330 | 1700/2350 | 1800/2500 |
| 1500mm | 1850/2500 | 1890/2590 | 1910/2610 | 2010/2760 | |
| 2000mm | 2090/2860 | 2130/2880 | 2150/2920 | 2250/3070 | |
Standard Accessories: three-jaw chuck,Driving plate, Center&Center sleeve,Wrenches,Oil gun,Operation manual.
Optional Accessories: Steady rest, Follower rest, four-jaw chuck, Face plate, Thread plate, Longitudinal automatic trip,
Live center , Quick change toolpost, Taper copy ruler , four-position longitudinal automatic trip
