Precision Surface Grinding Machine TH-M3270
Time:2016/11/19 Traffic:
Charicteristics
●The vertical post of the machine is attached to the guide way, the balanced moving of the grinding wheel offer the fine precision of the machine.
●The guide way of cross travel is double “V”. A guide way of longitudinal travel is “V”, the other one is flat. The friction is small..
●Longitudinal, cross travel and spindle feed use hydraulic or manual driving.
●Spindle feel use microfeed set, the feed precision is up to 0.002mm.
●Japan made P4 precision spindle ball bearings are adopted for easy maintenance. The roughness of surface is smaller than Ra0.63.
●Logical controller that use programme controller combined with transducer to realize the machine auto feed, stepless and lubricate system offer oil periodicity.
●Auto feed realizing export contactless can be fit to feed and change direction frequently when manufacturing smaller workpiece with high dependability.
●Magnetizing and demagnetization controller realizing export contactless can be fit magnetizing and damagnetic frequently, the tie of demagnetization is short, avoid pulling and transfiguration of the electromagnetism chuck and workpiece.
Specifications
ITEMS | TH-M3270 | TH-M3270H | TH-M3270A | |||
Workable size(LxW) | Mm | 700x320 | ||||
Longitudinal travel of worktable | Mm | 800 | ||||
Transverse travel of worktable | mm | 360 | ||||
Maximum distance from spindle axis to worktable surface | Mm | 650 | ||||
Maximum load of worktable(Including chuck) | kg | 300 | ||||
“T” slot of worktable | Mm xN | 18 x1 | ||||
Movement speed of worktable | m/min | 5-25 | ||||
Transeverse auto feed of worktable | mm | 0.1-20 | 0.1-20 | |||
Transeverse rapid movement | mm/min | 780 | 780 | |||
Transverse feed of hand wheel | 1gra. |
0.02 4 |
||||
1rev. | ||||||
Spindie radpid vertical feed | 1500 | |||||
Spindle wheel feed | 1gra. |
0.001 0.03 |
||||
1rev. | ||||||
Rotating speed of grinding wheel | r/min | 1440 | ||||
Grinding wheel size | mm | 355x30 x127 | ||||
Spindle motor | Kw | 4 | ||||
Hydraulic motor of worktable movement | Kw | 1.5 | ||||
Auto motor of transverse movement | nu | 8 | ||||
Coolant pump | w | 40 | ||||
Flatness of word piece | mm | ≤0.005 | ||||
Roughness of word piece | um | ≤Ra0.63 | ||||
Overall dimensions (L*W*H) | cm | 216*160*195 | ||||
Packing dimensions(L*W*H) | cm | 229*170*222 | ||||
N.W./G.W | kg | 2000/2300 | ||||
Remark |
Dimension of chuck is 300x680mm TH-M3270 Cross and longitudinal movement is automatic TH-M3270H Logitudinal movement is automatic TH-M3270A Cross and longitudinal movement is automatic,cross movement is controlled by digital reader |