Current Location:Home > Products > Car/Motorcycle Engine Rebuilding > Working station&pressure tester >
Cylinder Head Pressure Tester TPT1600
Time:2016/11/21 Traffic:
* 360° Electric powered roll-over fixture.
* Hydraulic cradle lift for easy positioning of heavy cylinder heads.
* Stainless steel tank with heat barrier.
* Heating elements: two changeover 4500 Watts elements.
* Water level control.
* Low voltage: 24V operating control.
* Electronic adjustable thermostat.
* Heating programmer: daily or weekly.
Part Characteristics | Specification |
Maximum length (mm/inch) | 1200 mm / 47.24” |
Maximum width (mm/inch) | 400 mm / 15.74” |
Maximum height (mm/inch) | 300 mm / 11.81’’ |
Capacity of stainless steel tank | 500liters / 132 USngal |
Heating elements (kw) | 2x4.5 |
Hydraulic hoist (kw) | 0.37 |
Gear-motor (kw) | 0.25 |
Rotational speed (tr/min) | 4 |
Up and down travel time (mm/inch in 10sec) | 600mm/23.62 |
Thermostat ( °C ) | 0-70 |
Power supply | 400 V 3 PH + Ground (no neutral) |
Net weight approx (kg/lbs) | 480/1058 |
Length(mm/inch) | 2000 mm / 78.75” |
Width (mm/inch) | 1050 mm / 41.34” |
Height (mm/inch) | 1700 mm / 67” |
Standard Accessories
NO | Item | Unit | Qty | Remark |
1 | Round washer(φ60) | PC | 16 | |
2 | Open Gasket(φ60) | PC | 16 | |
3 | T nut(M16) | PC | 16 | |
4 | Screw rod(M16) | PC | 16 | |
5 | Pressing plate | PC | 4 | |
(Standard Acc’s) | ||||
6 | Parallel supporting plate | PC | 2 | |
(Standard Acc’s) | ||||
7 | Rubber seal ringφ30 δ=3 | PC | 20 | |
8 | Rubber seal ringφ40 δ=3 | PC | 15 | |
9 | Rubber seal ringφ60 δ=3 | PC | 10 | |
10 | Rubber seal ring100×50 δ=3 | PC | 10 | |
11 | Rubber seal ring80×40 δ=3 | PC | 10 | |
12 | Rubber seal ring60×30 δ=3 | PC | 20 | |
13 | Rubber plate 290×200 δ=3 | PC | 1 | |
14 | Quick-change connector(M5) | PC | 3 | |
15 | Manual HD1600 | block | 1 |